Interphase Tech ispan 5535 pri Manual Do Utilizador

This problem occurs if the system does not detect the 
adapter after the setup program copies driver files to 
the installation directory. (That is, the cards list is 
empty on the WAN Adapter Setup dialog, as described 
on page 33 of Installing the Software.)

When a message tells you to add a card:

1. Click OK. 

2. Install (or reinstall) the adapter, as instructed in 

3. If the WAN Adapter Setup still cannot detect the 

When the adapter is installed, continue as follows:

1. From the Start menu, select Programs, then 

INTERPHASE WAN Adapters, and then WAN 
Setup. 

2. Click Add on the main dialog, and do the following, 

(as instructed in Installing the Software):

a. Configure the adapter’s ISDN ports, as described 

in step 9 on page 35.

b. Start the WAN and RAS support software 

installation as described in steps 1 through 6, 
starting on page 28.

c. Complete the steps described in Setting up RAS