MINOLTA magicolor 2 Manual Do Utilizador

Cleaning the 

Printer

5-3

Printer Care

n

Do not touch the electrical contacts, gears, or laser beam 
devices. Doing so may damage the printer and cause the print 
quality to deteriorate.

n

Keep media in the output tray at minimum level. If the media 
stacks too high, your printer may experience media jams and 
excessive media curl.

n

Lift the printer from the bottom only, using the carrying grips 
under each side corner. Make sure two people are available to lift 
the printer when moving it.

n

Keep the following in mind when storing the printer for an 
extended period:

— Unplug the printer.

— Remove the toner and OPC belt cartridges from inside the 

printer. After removing the cartridges, return them to their 
original packaging. If the original packaging is not available, 
protect the toner cartridges from spilling toner, and protect 
the OPC belt cartridge from damage and light.

— See appendix B, “Technical Specifications,” in the 

Cleaning the Printer

Paper dust may accumulate inside the printer. This could affect the 
printer’s performance. To prevent any potential problems associated 
with this, you should clean your printer on a regular basis. You need 
to clean both the inside and outside of the printer.

M

 Turn off the printer, unplug the power cord, and 

disconnect all interface cables before cleaning.

Ziehen Sie den Netzstecker aus der Steckdose bevor 

Sie den Drucker reinigen.