MINOLTA magicolor 2 Manual Do Utilizador
Cleaning the
Printer
QMS magicolor 2 Op
eration
5-4
Guidelines for Cleaning Inside the Printer
n
Either clean the printer before use, or allow a few minutes after
unplugging it to allow the fusing unit to cool down.
unplugging it to allow the fusing unit to cool down.
n
Turn off the printer, unplug the power cord, and disconnect all
interface cables before cleaning inside the printer.
interface cables before cleaning inside the printer.
n
Read all caution and warning labels carefully, making sure to fol-
low any instructions contained in them. These labels are located
on the inside of the printer’s covers and the interior of the printer
body.
low any instructions contained in them. These labels are located
on the inside of the printer’s covers and the interior of the printer
body.
n
Use only dry, lint-free cotton cloths or swabs.
n
Make sure any parts removed during cleaning are replaced
before you plug in the power cord, reconnect the interface cables,
and turn on the printer.
before you plug in the power cord, reconnect the interface cables,
and turn on the printer.
Cleaning the Transfer Unit
These items in the transfer unit require cleaning:
n
Registration rollers
n
Transfer roller
n
Paper discharge
»
Note:
A dry cotton cloth and dry cotton swab are required for this
procedure.
1
Turn off and unplug the printer.