Kenwood TK-5410 Manual Do Utilizador

23

■

 

When you receive a group call on a Conventional channel 

and the received group ID matches the ID set up on your 

transceiver, you can hear the caller’s voice.

 

When you receive a group call on a Trunking channel, the 

transceiver automatically switches to the traffic channel to 

receive the call.

•  Readjust the volume as necessary.
•  If the vibrator function is on, the transceiver will vibrate when a 

call is received.

■

 

When you receive an individual call on a Conventional 

channel, a ringing tone will sound and on K2/K3/K/K/K7 

model transceivers, the display will show the caller’s ID.  

To respond to the call, press and hold the 

PTT switch and 

speak into the transceiver as you would during a normal 

transmission.

 

When you receive an individual call on a Trunking channel, 

a ringing tone will sound and on K2/K3/K/K/K7 model 

transceivers, the display will alternate between the caller’s 

ID and “RECEIVING”.  To receive the call, press the 

PTT 

switch.  To deny the call, press and hold the 

Side 1 key or 

the keypad 

# key.  After receiving the call, you can respond 

to the call by pressing and holding the 

PTT switch and 

speaking into the transceiver as you would during a normal 

transmission.  After the call is finished, press the 

Side 1 key 

or the keypad 

# key to end the call.

•  If the vibrator function is on, the transceiver will vibrate when a 

call is received.