Bay Technical Associates BayTech DS72 Manual Do Utilizador
DS72 Host Module
30
Select 4), from the probe type menu allows the administrator to set the High and Low Air Flow range.
Option 2 and 4 will enable/disable their corresponding SNMP traps.
Option 2 and 4 will enable/disable their corresponding SNMP traps.
Host Module responds with the new values.
NOTE: the values are given in tenth of a degree, so the below values are 9.9 degrees for the
high value and 6.0 degrees for the low value.
high value and 6.0 degrees for the low value.
NOTE: Selecting the values for the Humidity and Air Flow is the same the Temperature
options.
options.
Status
The option gives the current network status. The Host Module displays the following:
System
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Humidity
Sensor Number: All Name: all RPCs/RPSs Type: Humidity
1...High Threshold (tenths of meas. unit): NP
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Air Flow
Sensor Number: All Name: all RPCs/RPSs Type: Air Flow
1...High Threshold (tenths of meas. unit): NP
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Temperature
Sensor Number: All Name: all RPCs/RPSs Type: Temperature
1...High Threshold (tenths of meas. unit): 99
2...High Threshold Trap Enable: Enabled
3...Low Threshold (tenths of meas. unit): 60
4...Low Threshold Trap Enable: Enabled
Enter threshold value in tenths of unit measurement (degrees,%%,etc.):
2...High Threshold Trap Enable: Enabled
3...Low Threshold (tenths of meas. unit): 60
4...Low Threshold Trap Enable: Enabled
Enter threshold value in tenths of unit measurement (degrees,%%,etc.):
DS-72 Status Menu.
Enter selection, CR to exit.
1)...System
2)...Network Interface
3)...Logged Users
Enter Request :1
Enter selection, CR to exit.
1)...System
2)...Network Interface
3)...Logged Users
Enter Request :1