opcode studio 4 Manual Do Utilizador
PART 1: Overview and Installation
20
Opcode Systems, Inc.
If you have never worked with OMS,
please read the OMS manual before con-
tinuing with the Studio 4 manual.
please read the OMS manual before con-
tinuing with the Studio 4 manual.
LAUNCHING THE OMS SETUP
APPLICATION
APPLICATION
By now you should have connected the
Studio 4 to your Macintosh and installed
the OMS software. The next step is to
launch the OMS Setup application:
Studio 4 to your Macintosh and installed
the OMS software. The next step is to
launch the OMS Setup application:
햲
Turn on your Studio 4.
햳
Double-click the OMS Setup icon.
If you have never used OMS, or if you
haven't defined a current Studio Setup
document, you will need to open and
create a new Studio Setup document.
Your OMS manual describes this proce-
dure in detail, but highlights are included
in the next section, “Creating a New
Custom Studio Setup Document.”
haven't defined a current Studio Setup
document, you will need to open and
create a new Studio Setup document.
Your OMS manual describes this proce-
dure in detail, but highlights are included
in the next section, “Creating a New
Custom Studio Setup Document.”
If you are already an OMS user and have
defined a current Studio Setup document,
you will need to update your setup to
work with the Studio 4. This is described
in “Updating an Old Studio Setup Docu-
ment”, later in this chapter.
defined a current Studio Setup document,
you will need to update your setup to
work with the Studio 4. This is described
in “Updating an Old Studio Setup Docu-
ment”, later in this chapter.
Creating a New Custom Studio
Setup Document
Setup Document
햲
Launch the OMS Setup application.
If you do not have a current OMS Studio
Setup document, you will be asked to
create one when you launch the OMS
Setup application.
Setup document, you will be asked to
create one when you launch the OMS
Setup application.
A dialog box appears (as shown in
Figure 4.1). There is a check box for
each Macintosh serial port. You should
check only those ports that are con-
nected to the Studio 4 or any other MIDI
interface you wish to appear in your
Studio Setup document.
Figure 4.1). There is a check box for
each Macintosh serial port. You should
check only those ports that are con-
nected to the Studio 4 or any other MIDI
interface you wish to appear in your
Studio Setup document.
Figure 4.1: Interfaces Dialog Box
햳
Click Search or hit the return key.
The Macintosh searches the checked
serial ports for MIDI interfaces. It also
looks for any NuBus cards that have an
OMS driver installed. When it finds all
interfaces and cards, it creates a new,
untitled Studio Setup document. The
serial ports for MIDI interfaces. It also
looks for any NuBus cards that have an
OMS driver installed. When it finds all
interfaces and cards, it creates a new,
untitled Studio Setup document. The