sentrol zxled12 Manual Do Utilizador
10
Silencing Alarms
To silence an alarm:
1.
Press .
2.
Enter passcode: .
Silencing an alarm quickly may prevent a false alarm from being
reported to the authorities. If the Armed Status Indicator light is NOT
flashing, you can stop the false alarm from being reported. If the
Armed Status Indicator light is flashing, then the false alarm has been
reported and you need to contact the Central Station. When you
silence an alarm that has been reported, the Control Station will go
into Alarm Memory mode (see Alarm Conditions - Alarm Memory).
reported to the authorities. If the Armed Status Indicator light is NOT
flashing, you can stop the false alarm from being reported. If the
Armed Status Indicator light is flashing, then the false alarm has been
reported and you need to contact the Central Station. When you
silence an alarm that has been reported, the Control Station will go
into Alarm Memory mode (see Alarm Conditions - Alarm Memory).
System Not Ready
1.
Identify zones not ready. The LEDs for zones not ready are lit. See
Protection Zones for a list of zone locations.
Protection Zones for a list of zone locations.
2.
Secure zones not ready. If you cannot secure a zone or do not
want to secure a zone, you may still turn the system ON by
bypassing the zone. See Optional Features - Bypass and Force
Arming.
want to secure a zone, you may still turn the system ON by
bypassing the zone. See Optional Features - Bypass and Force
Arming.
Changing The Security Level
From the STAY or NIGHT mode
1.
Press
,
or .
2.
Enter passcode: .
3.
The button pressed in step 1 will go ON steady and the other
OPERATING YOUR SYSTEM
OFF
CANCEL
NIGHT
STAY
AWAY