sentrol zxled12 Manual Do Utilizador
11
OPERATING YOUR SYSTEM
2 buttons will flash indicating exit countdown time. It is safe to
exit the building during the exit countdown time. If you exit
during the last 10 seconds of countdown time, the timer will
restart the countdown once. If you turn your system ON in the
AWAY mode and you do not exit, the countdown will begin again
only once so that you may exit.
exit the building during the exit countdown time. If you exit
during the last 10 seconds of countdown time, the timer will
restart the countdown once. If you turn your system ON in the
AWAY mode and you do not exit, the countdown will begin again
only once so that you may exit.
When the system is turned ON in the STAY or NIGHT
mode, you can switch between these modes as often
as you wish without turning your system OFF. When
the system is turned ON in the AWAY mode, you must
turn your system OFF first before you can change
security levels.
mode, you can switch between these modes as often
as you wish without turning your system OFF. When
the system is turned ON in the AWAY mode, you must
turn your system OFF first before you can change
security levels.
Chime
To enable or disable a “Chime” sound whenever an exterior window or
door zone is opened:
door zone is opened:
1.
Press .
2.
Enter passcode: .
Printing The Event Log -
(ZX400/ZX410 only)
The Event Log is a record of the activities of your security system. You
may print the Event Log if you have a printer attached.
may print the Event Log if you have a printer attached.
To print the Event Log:
1.
Press .
2.
Enter passcode: .
NOTE
6
3