sentrol zxled12 Manual Do Utilizador
9
Turning Your System OFF
1.
Press .
2.
Enter passcode: .
The Armed Status Indicator light will turn OFF.
Turning Your System ON
1.
Close all doors and windows.
2.
Check for a Ready light on the Control Station. If you do not see it,
see Operating Your System - System Not Ready.
see Operating Your System - System Not Ready.
3.
Press
,
or .
4.
Enter passcode: .
5.
The button pressed in step 3 will go ON steady and the other 2
buttons will flash indicating exit countdown time. It is safe to exit
the building during the exit countdown time. If you exit during
the last 10 seconds of countdown time, the timer will restart the
countdown once. If you turn your system ON in the AWAY mode
and you do not exit, the countdown will begin again only once so
that you may exit.
buttons will flash indicating exit countdown time. It is safe to exit
the building during the exit countdown time. If you exit during
the last 10 seconds of countdown time, the timer will restart the
countdown once. If you turn your system ON in the AWAY mode
and you do not exit, the countdown will begin again only once so
that you may exit.
When turning your system ON in the STAY or NIGHT
mode, you may press the ENTER key during the
countdown time to cancel the countdown and turn
your system ON instantly. When you cancel the
countdown time, the entry time is also disabled. If
your front door is opened while your system is turned
ON, an alarm will occur immediately.
mode, you may press the ENTER key during the
countdown time to cancel the countdown and turn
your system ON instantly. When you cancel the
countdown time, the entry time is also disabled. If
your front door is opened while your system is turned
ON, an alarm will occur immediately.
OPERATING YOUR SYSTEM
NIGHT
STAY
AWAY
NOTE
OFF
CANCEL