Puls YRM2.DIODE Redundancy Module Guia De Especificação
YRM2.DIODE
Y-Series
DC24-48V,
20A,
D
UAL
R
EDUNDANCY
M
ODULE
15. A
PPROVALS
EC Declaration of Conformity
The CE mark indicates conformance with EMC directive
2004/108/EC and the low-voltage directive (LVD) 2006/95/EC.
2004/108/EC and the low-voltage directive (LVD) 2006/95/EC.
IEC 60950-1
CB Scheme,
Information Technology Equipment
Information Technology Equipment
UL 508
IND. CONT. EQ.
18WM
LISTED
Listed for use as Industrial Control Equipment;
U.S.A. (UL 508);
E-File: E198865
U.S.A. (UL 508);
E-File: E198865
UL 60950-1
Recognized for use as Information Technology Equipment,
Level 5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950);
E-File: E137006
Level 5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950);
E-File: E137006
CSA 22.2 No107.1-01
CSA approval for Canada
CAN/CSA C22.2 No 107-1; CAN/ CSA 60950-1-03; UL60950-1
CAN/CSA C22.2 No 107-1; CAN/ CSA 60950-1-03; UL60950-1
ANSI / ISA 12.12.01-2007
(Class I Div 2),
pending
(Class I Div 2),
pending
LISTED for use in Hazardous Location Class I Div 2 Tx Groups
A,B,C,D systems; U.S.A. (ANSI / ISA 12.12.01-2007) and Canada
(C22.2 No. 213-M1987)
A,B,C,D systems; U.S.A. (ANSI / ISA 12.12.01-2007) and Canada
(C22.2 No. 213-M1987)
The unit is suitable for use in Class I Division 2 Groups A, B, C, D locations.
Substitution of components may impair suitability for Class I Division 2 environment.
Do not disconnect equipment unless power has been switched off. Wiring must be
in accordance with Class I, Division 2 wiring methods of the National Electrical Code,
NFPA 70, and in accordance with other local or national codes.
Substitution of components may impair suitability for Class I Division 2 environment.
Do not disconnect equipment unless power has been switched off. Wiring must be
in accordance with Class I, Division 2 wiring methods of the National Electrical Code,
NFPA 70, and in accordance with other local or national codes.
EN 60079-15
ATEX
pending
ATEX
pending
II 3G Ex nAC II Tx
Approval for use in hazardous locations Zone 2 Category 3G.
Number of ATEX certificate: EPS 09 ATEX 1 236
The redundancy module must be built-in in an IP54 enclosure.
Number of ATEX certificate: EPS 09 ATEX 1 236
The redundancy module must be built-in in an IP54 enclosure.
Marine
GL (Germanischer Lloyd) classified and
ABS (American Bureau for Shipping) PDA, Environmental
category: C, EMC2, Marine and offshore applications
ABS (American Bureau for Shipping) PDA, Environmental
category: C, EMC2, Marine and offshore applications
GOST P
Certificate of Conformity for Russia and other GUS countries
16. F
ULFILLED
S
TANDARDS
EN/IEC 60204-1
Safety of Electrical Equipment of Machines
EN/IEC 61131-2
Programmable Controllers
EN 50178, IEC 62103
Electronic Equipment in Power Installations
17. U
SED
S
UBSTANCES
The unit does not release any silicone and is suitable for use in paint shops.
The unit conforms to the RoHS directive 2002/96/EC
Plastic housings and other molded plastic materials are free of halogens, wires and cables are not PVC insulated.
The production material within our production does not include following toxic chemicals:
Polychlorized Biphenyl (PCB), Polychlorized Terphenyl (PCT), Pentachlorophenol (PCP), Polychlorinated naphthalene
(PCN), Polybrom Biphenyll (PBB), Polybrom Bipheny-oxyd (PBO), polybrominated Diphenylether (PBDE), Polychlorinated
Diphenylether (PCDE), Polydibromphenyl Oxyd (PBDO), Cadmium, Asbestos, Mercury, Silicia
The unit conforms to the RoHS directive 2002/96/EC
Plastic housings and other molded plastic materials are free of halogens, wires and cables are not PVC insulated.
The production material within our production does not include following toxic chemicals:
Polychlorized Biphenyl (PCB), Polychlorized Terphenyl (PCT), Pentachlorophenol (PCP), Polychlorinated naphthalene
(PCN), Polybrom Biphenyll (PBB), Polybrom Bipheny-oxyd (PBO), polybrominated Diphenylether (PBDE), Polychlorinated
Diphenylether (PCDE), Polydibromphenyl Oxyd (PBDO), Cadmium, Asbestos, Mercury, Silicia
May 2010 / Rev. 1.2 DS-YRM2.DIODE-EN
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone +49 89 9278 0 Germany
11/18