Puls YRM2.DIODE Redundancy Module Guia De Especificação
YRM2.DIODE
Y-Series
DC24-48V,
20A,
D
UAL
R
EDUNDANCY
M
ODULE
18. P
HYSICAL
D
IMENSIONS AND
W
EIGHT
Weight
350g / 0.77lb
DIN-Rail
Use 35mm DIN-rails according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.
The DIN-rail height must be added to the unit depth (117mm) to calculate the total required
installation depth.
The DIN-rail height must be added to the unit depth (117mm) to calculate the total required
installation depth.
Installation clearances
See chapter 2
Fig. 18-1 Front view
Fig. 18-2 Side view
May 2010 / Rev. 1.2 DS-YRM2.DIODE-EN
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted
www.pulspower.com Phone +49 89 9278 0 Germany
12/18