Rainbow Aircraft Inc. V10 Manual Do Utilizador
COMM TX ON / OFF
If you are using a dual radio setup or are using a remote head or other remote function to
control the radio you need to select this function to “on”. This will enable continuous
transmission of the radios status on both RS232 serial interfaces as well as the airtalk
interface. This function is “off” as a default.
There is a possibility of slight microphone interference related to the transmission of digital
data if installation is not optimum or you have unterminated (open) audio inputs such as the
auxiliary input or insufficiently shielded microphone cables. If you do not have a need for the
transmission of the radio status data, we recommend that you set this function to “off”.
Please note that with this function set to “off” remote control of your V10 radio to set
frequencies from a connected EFIS system is still possible.
control the radio you need to select this function to “on”. This will enable continuous
transmission of the radios status on both RS232 serial interfaces as well as the airtalk
interface. This function is “off” as a default.
There is a possibility of slight microphone interference related to the transmission of digital
data if installation is not optimum or you have unterminated (open) audio inputs such as the
auxiliary input or insufficiently shielded microphone cables. If you do not have a need for the
transmission of the radio status data, we recommend that you set this function to “off”.
Please note that with this function set to “off” remote control of your V10 radio to set
frequencies from a connected EFIS system is still possible.
Default
This function ask for confirmation before reseting all settings to factory default.
Items NOT affected are:
a) Memory channels
b) Current active and standby frequencies
Items NOT affected are:
a) Memory channels
b) Current active and standby frequencies