Rainbow Aircraft Inc. V10 Manual Do Utilizador
Frequency lists
If you have your transceiver connected to a Garmin SL30 or SL40 compatible frequency
source (such as an EFIS or aviation GPS), it may be possible for these devices to upload
frequency lists to your transceiver.
The Garmin frequency list system consists of up to 10 lists with up to 20 frequencies each.
Each list is normally used to contain the frequencies for one airport. Each frequency is
marked by function (such as tower, ground, etc).
Each list is identified by a four character identifier.
source (such as an EFIS or aviation GPS), it may be possible for these devices to upload
frequency lists to your transceiver.
The Garmin frequency list system consists of up to 10 lists with up to 20 frequencies each.
Each list is normally used to contain the frequencies for one airport. Each frequency is
marked by function (such as tower, ground, etc).
Each list is identified by a four character identifier.
If at least one list containing at least one frequency has been uploaded to your V10
transceiver, you will be presented with a new menu entry (first level menu).This menu function
allows you to select either the normal 100 channel memory to be used for channel selection
or you can select from any of the uploaded frequency lists. For example the next picture
shows the selection for a list called “KLAX”, Los Angeles International.
transceiver, you will be presented with a new menu entry (first level menu).This menu function
allows you to select either the normal 100 channel memory to be used for channel selection
or you can select from any of the uploaded frequency lists. For example the next picture
shows the selection for a list called “KLAX”, Los Angeles International.
Select either “Channels” to use the normal 100 channel memory or select one of the uploaded
lists as you require.
List frequencies can be selected in the same way that you would access normal channels.
Each frequency will be displayed with the list name and frequency function.
Note: If you switch your V10 transceiver off, uploaded frequency lists are cleared. Your
frequency source (EFIS, GPS) needs to upload the lists again after you switch on your V10
transceiver.
Note: MGL Avionics EFIS systems do not use frequency lists. This functionality has moved
into the EFIS and direct frequency selection via the EFIS is used.
lists as you require.
List frequencies can be selected in the same way that you would access normal channels.
Each frequency will be displayed with the list name and frequency function.
Note: If you switch your V10 transceiver off, uploaded frequency lists are cleared. Your
frequency source (EFIS, GPS) needs to upload the lists again after you switch on your V10
transceiver.
Note: MGL Avionics EFIS systems do not use frequency lists. This functionality has moved
into the EFIS and direct frequency selection via the EFIS is used.