Netgear 12200196 Manual Do Utilizador

Click Refresh or Reload in the Web browser. The changes might have occurred, but the 

Web browser might be caching the old configuration.

Troubleshoot Your Network Using the Ping Utility

Most network devices and routers contain a ping utility that sends an echo request packet to 
the designated device. The device then responds with an echo reply. Troubleshooting a 
network is made very easy by using the ping utility in your computer or workstation. This 
section includes:

Test the LAN Path to Your Router

You can ping the router from your computer to verify that the LAN path to your router is set up 
correctly.

From the Windows toolbar, click Start, and then select Run.

In the field provided, type ping followed by the IP address of the router, as in this example:

    

Click OK.

You should see a message like this one:

    

If the path is working, you see this message:

    

If the path is not working, you see this message:

    

If the path is not functioning correctly, you could have one of the following problems:

Wrong physical connections

For a wired connection, make sure that the numbered LAN port LED is on for the 

port to which you are connected. If the LED is off, follow the instructions in 

Check that the appropriate LEDs are on for your network devices. If your router 

and computer are connected to a separate Ethernet switch, make sure that the 
link lights are on for the switch ports that are connected to your computer and 
router.

Wrong network configuration