ComSonics Inc. 2007VMD Manual Do Utilizador

6

 

 

 

Vehicle Mount Device (VMD) 
The Qualifier X-Ray system requires installation of the Qualifier Vehicle Mounted 
Device (VMD) and a Dual Band Antenna. 
 
 
Installation Precautions 
Please observe the following during installation. 

•  Wear eye protection when installing the system. 
•  The vehicle must have a 12-volt negative ground electrical system. 
•  Insure that no mounting hardware makes contact with any wiring, fuel/brake 

lines or other components. 

•  Insure the mounting position of the VMD is clear of obstacles. 
•  Protect the system from metal debris. 
•  Do not route cabling or wiring through sharp edged openings or potential 

pinch points to prevent future failures and safety hazards. 

•  Maintain at least one inch of clearance around the VMD for proper cooling. 

 
 
 
 
 
 

1.  The installer of this equipment should ensure that the VMD is 

not co-located with other radio devices.  

2.  The VMD should be installed to ensure a minimum separation 

distance of 20cm from all persons.