Digi International Inc XBEEPRO2 Manual Do Utilizador

The XBee module was designed to mount into a receptacle (socket) and therefore does not require any 
soldering when mounting it to a board. The XBee-PRO Development Kits contain RS-232 and USB interface 
boards which use two 20-pin receptacles to receive modules.

XBee‐PRO Module Mounting to an RS‐232 Interface Board. 

The receptacles used on Digi development boards are manufactured by Century Interconnect. Several other 
manufacturers provide comparable mounting solutions; however, Digi currently uses the following 
receptacles:

• Through-hole single-row receptacles - 

Samtec P/N: MMS-110-01-L-SV (or equivalent)

• Through-hole single-row receptacles - 

Mill-Max P/N: 831-43-0101-10-001000

• Surface-mount double-row receptacles - 

Century Interconnect P/N: CPRMSL20-D-0-1 (or equivalent)

• Surface-mount single-row receptacles - 

Samtec P/N: SMM-110-02-SM-S

Digi also recommends printing an outline of the module on the board to indicate the orientation the 

module should be mounted.