Agfa Gevaert N V 5364A Manual Do Utilizador
74
2900H EN 20071108
Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE
MANUAL
Changing the sorter configuration
1
Perform steps 1 to 2 of the
procedure on
page
to select the ‘General’ screen.
2
On the ‘Change setting’ screen, press the Confirm key to select ‘General’.
The ‘General’ screen is displayed:
3
On the ‘General’ screen, press the Down key twice, followed by the Confirm key
to select ‘Sorter Configuration’.
to select ‘Sorter Configuration’.
The ‘Sorter Configuration’ screen is displayed:
4
Use the Up and Down keys to select the output tray you wish to configure and
press the Left/Right arrow keys to install/uninstall the output tray.
press the Left/Right arrow keys to install/uninstall the output tray.
5
Click OK to install the indicated output tray.
An asterix left from an output tray indicates that the respective output tray is
installed.
installed.
*position 1 (upper)
*position 2
position 3
*position 4 (lower)