Agfa Gevaert N V 5364A Manual Do Utilizador
76
2900H EN 20071108
Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE
MANUAL
Changing the beep on empty tray settings
1
Perform steps 1 to 2 of the
procedure on
page
to select the ‘General’ screen.
2
On the ‘Change setting’ screen, press the Confirm key to select ‘General’.
The ‘General’ screen is displayed:
3
On the ‘General’ screen, press the Down key four times, followed by the Confirm
key to select ‘Beep on empty tray’.
key to select ‘Beep on empty tray’.
The ‘Audible alarm on empty tray’ screen is displayed:
4
Use the Up/Down arrow keys to select the desired setting:
•
Select ‘No alarm’ if you do not want an audible signal to warn you that a
tray is empty.
tray is empty.
•
Select 5 times to hear 5 consecutive beeps at the moment a tray gets empty.
•
Select ‘While tray is empty’ to hear a beep the whole time a tray is empty.
5
Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
without any changes.
No alarm
*5 times
While tray is empty