Agfa Gevaert N V 5364A Manual Do Utilizador
75
2900H EN 20071108
Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE
MANUAL
Changing the assignment modality - output tray
1
Perform steps 1 to 2 of the
page
to select the ‘General’ screen.
2
On the ‘Change setting’ screen, press the Confirm key to select ‘General’.
The ‘General’ screen is displayed:
3
On the ‘General’ screen, press the Down key three times, followed by the
Confirm key to select ‘Assignment modal./tray’.
Confirm key to select ‘Assignment modal./tray’.
The ‘Assignment modal./tray’ screen is displayed:
4
Select a modality by using the select key and pressing Confirm.
The following window is displayed:
5
Use the Up/Down arrow keys to select the output trays for the particular
modality and press the Left/Right arrow keys to install button to uninstall/
modality and press the Left/Right arrow keys to install button to uninstall/
install the output tray.
If you have selected more than one input tray, you must consecutively assign the
output trays.
output trays.
The number of selections depends on the number of modalities defined.
An asterix left from an output tray indicates that the respective output tray is
installed.
installed.
1 <Modality name>
2 <Modality name>
3 <Modality name>
4 <Modality name>
5 <Modality name>
6 <Modality name>
7 <Modality name>
<Modality name>
*position 1 (upper)
*position 1 (upper)
position 2
position 3
position 4 (lower)