ADC Telecommunications Inc. PSM7A7UD Manual Do Utilizador

For Dual‐Slot installations, the RF cables and connectors are labeled as

and

, where

refers to the bottom slot of the double‐slot installation. For example, for a

Dual‐Slot installation in a Quad‐Bay chassis, the RF cables and connectors are labeled as

and

.

The cables and connectors have corresponding labels as shown in

Dual‐Slot 40W RF Modules.

Table 8.  RF Antenna Labels for Dual‐Slot 40W RF Modules (Top of Chassis Down) 

 (a) (b)

Mod D 
TX0/RX0

Transmit RF power and primary receive 
to/from the antenna for RF Module D

N/A

N/A

Slots C and D

Mod D RX1

Diversity receive for RF power from the 
antenna for RF Module D

Mod C 
TX0/RX0 

Transmit RF power and primary receive 
to/from the antenna for RF Module C

N/A

N/A

Mod C RX1

Diversity receive for RF power from the 
antenna for RF Module C

Mod B 
TX0/RX0 

Transmit RF power and primary receive 
to/from the antenna for RF Module B

Slots A and B

Slots A and B

Slots A and B

Mod B RX1

Diversity receive for RF power from the 
antenna for RF Module B

Mod A 
TX0/RX0 

Transmit RF power and primary receive 
to/from the antenna for RF Module A

Mod A RX1

Diversity receive for RF power from the 
antenna for RF Module A

(a)

N/A indicates that the slot cannot be used for a Dual-Slot 40W RF Module

(b)

Install the Dual-Slot 40W RF Module in the lower-most slot in the chassis. If, however, if two Dual-Slot 40W 

RF Modules are present, install the 2100 Module in the lower-most slot and the 1900 Module in the 
upper-most slot.