ADC Telecommunications Inc. PSM7A7UD Manual Do Utilizador
Dual-Slot Modules Only—Remove the Module Slot Shelf
FlexWave Prism RF Modules for Prism Remote Units Installation Guide
Page 25
TECP-77-141 Issue 5 • 300001744178 Rev E • November 2013
© 2013 TE Connectivity Ltd.
Dual‐Slot Modules Only—Remove the Module Slot Shelf
1
For Dual‐Slot RF Modules only.
If you are installing a Dual‐Slot
RF Module, you must remove a
module slot shelf from the PRU
chassis to accommodate the
module’s size. (For further
information, see
If you are installing a Dual‐Slot
RF Module, you must remove a
module slot shelf from the PRU
chassis to accommodate the
module’s size. (For further
information, see
.)
Remove the shelf as appropriate
for the RF Module:
for the RF Module:
•
For a Dual‐Slot 40W RF
Module, remove the Module
B Shelf.
Module, remove the Module
B Shelf.
•
For a Dual‐Bay Dual‐Slot RF
Module, remove Module D
Shelf.
Module, remove Module D
Shelf.
To remove the module shelf:
a
Use a 9/64” Allen
™
wrench
to remove the three screws
that attach the module shelf
to the PRU chassis, as shown
in the following graphic.
that attach the module shelf
to the PRU chassis, as shown
in the following graphic.
b
Discard or store the module
shelf and fasteners.
shelf and fasteners.
Use 9/64” Allen Wrench to
remove the three module-shelf screws
remove the three module-shelf screws
Remove Module D Shelf for
Dual-Band Dual-Slot RF Modules
Dual-Band Dual-Slot RF Modules
Remove Module B Shelf for
Dual-Slot 40W RF Modules
Dual-Slot 40W RF Modules