Badger Meter Inc 2014GWGAL Manual Do Utilizador
Installation Manual
1 . Locate the BAND-IT tool and supplied installation instructions .
2 . Follow the BAND-IT-supplied installation instructions enclosed with the BAND-IT tool for attaching the network
2 . Follow the BAND-IT-supplied installation instructions enclosed with the BAND-IT tool for attaching the network
gateway receiver to a pole .
3 . Using a 1/2-inch wrench, the recommended torque for the 5/16-24 screw that attaches the gateway bracket to the
BAND-IT banding is 144…168 inch-pounds (12…14 foot-pounds) .
Figure 10: Gateway shown with BAND-IT mounting hardware
Page 13
February 2014