Badger Meter Inc 2014GWGAL Manual Do Utilizador

Badger Meter provides an AC-to-DC power supply with power cord that plugs into a standard three-prong 120V AC outlet . If 

powering the gateway directly via DC power, please refer to the DC power information on 

 .

Use only approved Badger Meter power cable, 100-feet (66233-010) or 300-feet (66233-013) for this assembly .

• 

M12 plug, 8-conductor connector (66525-002)

• 

Badger Meter power cable, 100 feet or 300 feet with 308 in-line connector end

• 

308 in-line connector anti-tamper collar

• 

Outdoor-rated Cat5e Ethernet cable (LAN gateways only) (customer supplied)

• 

Coax stripper (customer supplied)

• 

Wire stripper for 22 AWG wires (customer supplied)

• 

Precision slotted screwdriver with blade size of 2 .4 mm (0 .094") (customer supplied)

1 .  Push the connector parts onto the power cable in the following order: pressure nut, clamping cage, cable seal, sleeve 

with O-ring and finally, the coupling sleeve .

2 .  Strip the cable outer jacket to a maximum length of 1 .1 inches .

Insert

Coupling Sleeve

Sleeve 

w/O-ring

Cable

Seal

Clamping

Cage

Pressure

Nut