Tait International Limited TBCK4B Manual Do Utilizador
DRAFT 4
TB9400 Installation and Operation Manual
Installation
67
© Tait Electronics Limited September 2011
5.2
Unpacking and Moving the Subrack
The subrack is packed in a strong corrugated cardboard carton with top and
bottom foam cushions. To prevent personal injury and damage to the
equipment, we recommend that two people unpack and move the subrack.
To remove the subrack from the carton, follow the procedure illustrated in
bottom foam cushions. To prevent personal injury and damage to the
equipment, we recommend that two people unpack and move the subrack.
To remove the subrack from the carton, follow the procedure illustrated in
.
Caution
A subrack complete with modules can weigh up to
55 lb (25 kg), or up to 62 lb (28 kg) complete with
packaging. We recommend that you have another
person help you unpack and move the subrack. The
TBAA03-16 carrying handles will make it easier to
move the subrack once it has been unpacked. If nec-
essary, remove the modules from the subrack before
moving it (refer to
55 lb (25 kg), or up to 62 lb (28 kg) complete with
packaging. We recommend that you have another
person help you unpack and move the subrack. The
TBAA03-16 carrying handles will make it easier to
move the subrack once it has been unpacked. If nec-
essary, remove the modules from the subrack before
moving it (refer to
). In all cases follow safe lifting practices.
1.
Cut the tape securing the flaps at the top of the carton and fold them
flat against the sides
flat against the sides
b
.
2.
Rotate the carton carefully onto its side
c
and then onto its top
d
,
ensuring that none of the flaps is trapped underneath.
Figure 5.2
Unpacking the subrack
b
e
g
f
h
i
c
d