Tait International Limited TBCK4B Manual Do Utilizador
DRAFT 4
76
Installation
TB9400 Installation and Operation Manual
© Tait Electronics Limited September 2011
5.5.3
Mounting the Subrack
Caution
A subrack complete with modules can weigh up to
55 lb (25 kg), or up to 62 lb (28 kg) complete with
packaging. We recommend that you have another
person help you unpack and move the subrack. The
TBAA03-16 carrying handles will make it easier to
move the subrack once it has been unpacked. If nec-
essary, remove the modules from the subrack before
moving it (refer to
55 lb (25 kg), or up to 62 lb (28 kg) complete with
packaging. We recommend that you have another
person help you unpack and move the subrack. The
TBAA03-16 carrying handles will make it easier to
move the subrack once it has been unpacked. If nec-
essary, remove the modules from the subrack before
moving it (refer to
). In all cases follow safe lifting practices.
1.
Remove the front panel, as described in
2.
Fit the subrack into the cabinet or rack and secure it firmly with an
M6 (0.25 in) screw, flat and spring washer in each of the four main
mounting holes
M6 (0.25 in) screw, flat and spring washer in each of the four main
mounting holes
b
, as shown in
Figure 5.3
Subrack mounting points
b
main mounting holes - front
c
auxiliary mounting holes - rear
front view
rear view
b
c