N. V. Nederlandsche Apparatenfabriek NEDAP SENSITEPL Manual Do Utilizador
SENSIT SYSTEM | MANUAL
SENSIT Interface Software
58/92
13.5.3 NODE PRESENCE
This screen will display information on the last received message from each node present in
the network. It will outline the Node ID, type number, version and the timestamp of the last
received message.
Node presence check (min)
If a node does not respond within a certain time period after transmission of the last
message, the SENSIT Server will check if the node is still available. In this menu option you
can select the time after receiving the last message (in minutes) when to send the Node
presence check.
Node presence check retry
The 'Node presence check retry' specifies the number of times the SENSIT Server shall try
to connect to the node.
the network. It will outline the Node ID, type number, version and the timestamp of the last
received message.
Node presence check (min)
If a node does not respond within a certain time period after transmission of the last
message, the SENSIT Server will check if the node is still available. In this menu option you
can select the time after receiving the last message (in minutes) when to send the Node
presence check.
Node presence check retry
The 'Node presence check retry' specifies the number of times the SENSIT Server shall try
to connect to the node.
Figure 43: Node presence
In the screenshot above several nodes are listed in the node cross check.
For example node id 00.0000.72BC is a SENSIT IR (type 3109). Every different type of node
has its own Type code, see below the general use types:
For example node id 00.0000.72BC is a SENSIT IR (type 3109). Every different type of node
has its own Type code, see below the general use types:
Type code
Node description
000c
Data Collector
0018
Relay Node 2G
3003
Relay Node 1G
3109
SENSIT Flush Mount or SENSIT IR
310D
SENSIT Flush Mount or SENSIT IR
310E
Electronic Parking License (EPL)
8004
WSN Display
13.6 DEFINITION
13.6.1 RELAY NODE CONFIGURATION
You can click the Refresh button and verify if the Relay Node ID appears in the Current
Relay Nodes list.
Relay Nodes list.
Figure 44: Relay Node configuration screen