N. V. Nederlandsche Apparatenfabriek NEDAP SENSITEPL Manual Do Utilizador
SENSIT SYSTEM | MANUAL
SENSIT Interface Software
59/92
The Relay Node ID is laser engraved on the Relay Node. There is also a 125kHz passive RFID
label embedded into the Relay Node. This can be used for verification of the Relay Node or
to localize Relay Nodes that are already installed in the field.
label embedded into the Relay Node. This can be used for verification of the Relay Node or
to localize Relay Nodes that are already installed in the field.
13.6.2 PARKING BAY CONFIGURATION
In the menu 'Parking bay configuration' SENSITs are allocated by their Node ID to individual
parking bays.
The data is imported into the system via a csv-file (comma separated values). The following
information should be entered into the csv-file separated by a comma (' , '). Note that the
combination of parking lot-id and bay-number must be unique.
Column 1
parking bays.
The data is imported into the system via a csv-file (comma separated values). The following
information should be entered into the csv-file separated by a comma (' , '). Note that the
combination of parking lot-id and bay-number must be unique.
Column 1
Parking lot ID (number indicating the parking lot).
Column 2
Zone ID (number indicating zone on the parking lot the bay is located in)
Zone ID is also used to identify Relay Nodes (RN) or Data Collectors (DC).
Zone ID is also used to identify Relay Nodes (RN) or Data Collectors (DC).
Column 3
Bay number (number indicating individual parking bay).
Bay number is also used to number a Relay Node or Data Collector
Column 4
Node ID. (SENSIT, Relay Node or Data Collector)
Column 5
GPS, Latitude (optional, in decimal degrees with max. 6 decimals).
Column 6
GPS, Longitude (optional, in decimal degrees with max. 6 decimals).
Column 7
GPS, Altitude (optional, in decimal degrees with max. 6 decimals).
Figure 45: Example parking bay configuration csv-file
Select the csv-file by clicking the 'Browse'-button, then click 'Import' to import the selected
file.
When the csv-file is imported, the screen will display the information. At each given
moment you can verify in this table the allocated SENSIT / Parking bay bindings. Refer to
the node cross check display to verify if all SENSIT are assigned to a parking bay (see
chapter 13.5.2). It is possible to incrementally expand the Parking bay configuration list by
importing only additional allocation information (Parking lot ID, Zone ID, bay/place number
and Node ID) via a new csv-file.
file.
When the csv-file is imported, the screen will display the information. At each given
moment you can verify in this table the allocated SENSIT / Parking bay bindings. Refer to
the node cross check display to verify if all SENSIT are assigned to a parking bay (see
chapter 13.5.2). It is possible to incrementally expand the Parking bay configuration list by
importing only additional allocation information (Parking lot ID, Zone ID, bay/place number
and Node ID) via a new csv-file.
Figure 46: Parking bay configuration
Note
Ensure that the filename and
file path do not include any
spaces.
Ensure that the filename and
file path do not include any
spaces.