Mindray DS USA Inc. WT0707-00000 Manual Do Utilizador

9.3

Installation Setup Tab 

The system Installation Setup tab (shown in FIGURE 9-5) controls access to restricted 
central station functions. This tab is available at the ViewStation and the WorkStation, and it 
functions in the same manner as it does at the host central station. The Installation Setup 
tab is password protected.

9.3.1

Accessing the Installation Setup Tab

1. From the menu bar, select the System Setup button. The first set of System Setup tabs 

is displayed.

2. Select the Installation Setup tab. The Installation Setup tab is displayed. 

 

FIGURE 9-5 Installation Setup Tab 

9.3.2

Entering a Password

To gain access to the protected central station system functions, the correct password must be 
entered in the Installation Setup tab’s password box. The password required for the 
Installation Setup tab is defined in the system Password tab. 

1. Select the Password text box in the Installation Setup tab. The keyboard dialog 

box is displayed.

2. Using the keyboard dialog box, enter the System password that was established in the 

Passwords tab (maximum 15 characters). For security purposes asterisks (*) are 
shown for each character entered. 

3. Accept or reject the text entered in the keyboard dialog box. For additional information 

about using the keyboard dialog box, refer to ‘‘Keyboard Dialog Box’’ on page 2-17.

The following tabs can be accessed at the central station after the correct password has been 
entered in the Installation Setup tab: Care Group, Volume, System Alarms, 
Passwords, Equipment Setup, More/Previous, Date/Time, Unit Priorities, Unit 
Choices, Wave Gain, and Wireless.

The following tabs can be accessed at the ViewStation and the WorkStation after the correct 
password has been entered in the Installation Setup tab: Volume, System Alarms, 
Passwords, Date/Time, and Unit Choices.