LIFEtool Solutions GmbH IMP Manual Do Utilizador
27
9.3
Recharging the battery
Battery power display
On the front of the IntegraMouse Plus there is a display consisting of two light-emitting diodes
(LEDs) in the form of a battery, which displays the battery power and the charging progress.
(LEDs) in the form of a battery, which displays the battery power and the charging progress.
LED 1
LED 2
Battery power Note
green
green
100% - 71%
Battery fully charged
green
Off
70% - 21%
Battery OK, charging not yet required
flashing orange
Off
below 20%
Low battery, please charge
Table 3: Battery power display
Charging
The charging of the battery occurs via the power pack included or by connection to the
computer via the USB cable. In both cases, use the mini USB socket on the reverse of the
IntegraMouse Plus. Plugging in is only possible in one direction. The charging process
begins immediately after plugging in and takes 2-3 hours. Progress is indicated on the battery
display:
computer via the USB cable. In both cases, use the mini USB socket on the reverse of the
IntegraMouse Plus. Plugging in is only possible in one direction. The charging process
begins immediately after plugging in and takes 2-3 hours. Progress is indicated on the battery
display:
LED 1
LED 2
Battery power Note
orange
Off
Battery is
being charged
being charged
Leave power pack plugged in until charging
process is completed.
process is completed.
green
green
Battery fully
charged
charged
Power pack can be unplugged
Table 4: Charging process display
Only use the power pack or the USB cable supplied to charge or operate the
mouse. Even when you have another power pack with mini USB available (e.g.
from a mobile telephone), do not use this to charge or operate the IntegraMouse
Plus.
mouse. Even when you have another power pack with mini USB available (e.g.
from a mobile telephone), do not use this to charge or operate the IntegraMouse
Plus.
Never change the battery yourself! If you suspect a problem with the battery,
contact the manufacturer or your dealer.
contact the manufacturer or your dealer.
9.4
Metrological testing
This product - especially when being used in a clinical environment - should regularly be
checked for safety. Regular safety testing - at the most every 24 months - can be carried out
by the operator, by authorized service personnel or by the manufacturer. Responsibility for
compliance lies with the operator of the IntegraMouse Plus.
checked for safety. Regular safety testing - at the most every 24 months - can be carried out
by the operator, by authorized service personnel or by the manufacturer. Responsibility for
compliance lies with the operator of the IntegraMouse Plus.