LIFEtool Solutions GmbH IMP Manual Do Utilizador
28
10.
PERMISSIBLE SYSTEM
The IntegraMouse Plus is intended for use as an input device for a computer (PC or laptop).
Please only use the USB cable supplied, or work in wireless mode. Please ensure that your
computer or laptop and all other devices which are connected to it (printer etc.) comply with
the relevant regulations.
Please only use the USB cable supplied, or work in wireless mode. Please ensure that your
computer or laptop and all other devices which are connected to it (printer etc.) comply with
the relevant regulations.
In rooms used for medical purposes, regulations to protect the patients' area
must be adhered to.
must be adhered to.
Be aware that it is on your own responsibility if you attend to use the product in
medical environment. In addition to that make sure to you are informed about
the local laws and adhere to them.
medical environment. In addition to that make sure to you are informed about
the local laws and adhere to them.
In the case of a connection with devices outside of the same medical rooms, it
may be necessary to install a means of isolation into the data line.
may be necessary to install a means of isolation into the data line.
A combination with other devices does not conform to the manufacturer's
intended use. The system integrator is responsible for reassessing conformity.
intended use. The system integrator is responsible for reassessing conformity.
External sensor
A suitable sensor can be plugged into the built-in 3,5 mm mono jack socket and used for
switching between the operating modes (mouse, joystick, cursor mode).
switching between the operating modes (mouse, joystick, cursor mode).
Only potential-free external sensors may be used.
Ask the manufacturer or your dealer for further
information on this.
Ask the manufacturer or your dealer for further
information on this.
Figure 15: External sensor