Meko Lighting Company Limited RF433M Manual Do Utilizador
TOOLS NEEDED (not supplied)
Phillips head
screwdriver
screwdriver
Brush
Pencil
E
SAFETY INSTRUCTIONS
1. Important! Main power voltage and fuse must meet the technical data specifications.
Before starting work, ensure that the main cable is not live. Switch off the fuse.
2. Fitting and maintenance work may only be carried out by a professional or an electrician
in accordance with local safety regulations.
3. All electrical connections must have good contact in order for this product to have a long, useful life.
4. LED chips of this LED strip can not be replaced.
5. This LED strip includes a linkable connector. Only link max two LED strips. Do not link more than
4. LED chips of this LED strip can not be replaced.
5. This LED strip includes a linkable connector. Only link max two LED strips. Do not link more than
two strips together.
6. Please only use LED driver which has been provided with this LED strip.
7. Never use the unit in a room where there is a danger of explosion or in the vicinity of flammable
7. Never use the unit in a room where there is a danger of explosion or in the vicinity of flammable
liquids or gases.
8. Do not bend, crush or pull the cable. Protect from sharp edges, oil and heat.
9. Do not touch the LED strip or electrical connector directly with hands.
9. Do not touch the LED strip or electrical connector directly with hands.
10. For indoor use only.
11. Do not use the LED strip on a timer, wall switch with dimming functions, or with an extension cord.
11. Do not use the LED strip on a timer, wall switch with dimming functions, or with an extension cord.
Using the LED strip with any of these voids the warranty and results in the LED strip not
functioning properly. The remote included has dimming functions.
functioning properly. The remote included has dimming functions.
12. Danger of eye damage! Never look directly at the LED chips of this LED strip.
13. Always keep this user manual within reach while installing this LED strip. Please read and
13. Always keep this user manual within reach while installing this LED strip. Please read and
understand the user manual to ensure proper installation and use. Always pay attention to the
technical data shown on the product. We reserve the right to make technical changes.
technical data shown on the product. We reserve the right to make technical changes.
14. Electrical waste should not be disposed of with household waste. Please recycle where facilities
exist.
15. Warning: The adapter not for use with receptacles that are weatherproof only when the receptacle
is covered (attachment plug cap not inserted and receptacle cover closed).
16. Warning: Risk of electric shock. Mount the adapter at a height greater than 30 cm / 11.8 in. from
the ground surface.
17. Do not submerge any part of this unit.
18. CAUTION: If you choose to modify the length of the LED strip, only cut along the scissors marks.
18. CAUTION: If you choose to modify the length of the LED strip, only cut along the scissors marks.
Please contact DSI Customer Service for further instructions.
Note: Once the LED strip is cut, it will lose the connectable capabilities. You will not be able to
add a new connector or additional strips to the strip that had been cut.
19. Ensure connectors and endcap are securely fastened before operating strip.
20. LED flexible lighting strip rating : 24VDC A.
20. LED flexible lighting strip rating : 24VDC A.
Safety instructions:
120VAC 60Hz
E
Measuring
tape
tape
120VAC 60Hz
5101 NW 21st Ave, Suite 520, Ft Lauderdale, FL 33309 USA
DSI Customer Service Hotline: 1-800-388-6141 ext. 216 Mon.– Fri., 9:30 a.m. to 3:00 p.m. EST
Customer Service E-mail: CustomerSupport@DSILighting.com
MODEL: DS18124
MADE IN CHINA
Page 2 of 12
5101 NW 21st Ave, Suite 520, Ft Lauderdale, FL 33309 USA
DSI Customer Service Hotline: 1-800-388-6141 ext. 216 Mon.– Fri., 9:30 a.m. to 3:00 p.m. EST
Customer Service E-mail: CustomerSupport@DSILighting.com
MODEL: DS18124
MADE IN CHINA
Page 3 of 12