Meko Lighting Company Limited RF433M Manual Do Utilizador
LED STRIP INSTALLATION
Remove any surface dust from the area where you will be
applying the LED strip.
applying the LED strip.
Note: Connect the LED strip (A) to the infrared receiver and adapter by aligning
the arrows on the connector leading from the infrared receiver to the connector
on the LED strip (A). If you require two LED strips, then connect the LED strip (B)
to the end of the LED strip (A) by aligning at the arrows on the connectors. Please
make sure the connectors are securely fastened all the way on both sides.
the arrows on the connector leading from the infrared receiver to the connector
on the LED strip (A). If you require two LED strips, then connect the LED strip (B)
to the end of the LED strip (A) by aligning at the arrows on the connectors. Please
make sure the connectors are securely fastened all the way on both sides.
Note: If you are only using one LED strip for your installation please use LED
strip (A).
strip (A).
Measure the desired space for the LED strip installation to determine if you
need to use one or two strips.
need to use one or two strips.
Remote
Adapter
RF receiver and 3.66 m / 12ft
1 set
1 PC
1 PC
Screw
Clip (type MH1)
28 PCS
12 PCS
Wire clip
2 PCS
End cap
1 PCS
PACKAGE CONTENTS
Caution - To prevent personal injury and damage to the LED strip and/or mounting surface, do not pull
the LED strip from the surface. To reduce the likelihood of injury or damage, mount this LED strip only
on a surface that is structurally sound.
the LED strip from the surface. To reduce the likelihood of injury or damage, mount this LED strip only
on a surface that is structurally sound.
Carefully unpack and identify each part to make sure you have everything ready for installation. Lay out
each part on a clean flat area such as a table or carpet. Check to make sure you have the following:
each part on a clean flat area such as a table or carpet. Check to make sure you have the following:
* Parts are not to scale
1
2
120VAC 60Hz
E
E
120VAC 60Hz
(Includes 26 + 2 replacements)
NOTE:
All parts and components sold together
in this package can only be used for this model.
3.66 m / 12 ft LED flexible strip (B)
1 set
correct
correct
correct
WW
Flash
B
A
LED flexible strip (A) as one est
5101 NW 21st Ave, Suite 520, Ft Lauderdale, FL 33309 USA
DSI Customer Service Hotline: 1-800-388-6141 ext. 216 Mon.– Fri., 9:30 a.m. to 3:00 p.m. EST
Customer Service E-mail: CustomerSupport@DSILighting.com
MODEL: DS18124
MADE IN CHINA
Page 4 of 12
5101 NW 21st Ave, Suite 520, Ft Lauderdale, FL 33309 USA
DSI Customer Service Hotline: 1-800-388-6141 ext. 216 Mon.– Fri., 9:30 a.m. to 3:00 p.m. EST
Customer Service E-mail: CustomerSupport@DSILighting.com
MODEL: DS18124
MADE IN CHINA
Page 5 of 12