Ever Superline 11 12kVA / 9.6kW W/SPRLTO-1112K0/00 Manual Do Utilizador
Códigos do produto
W/SPRLTO-1112K0/00
CONNECTION TERMINALS
SUPERLINE 1-1
terminals with protectioni
F3
L
B
L
WEJ AC
L
B
L
N
N
WYJ AC
L
N
PE
WEJ DC
+
-
F4
The UPS is not p
rovided with connection wires with sockets. Therefore, the connection takes place by screwing the
ends of the individual conductors to the connector. Then, the conductors need to be protected against being pulled out
with clips that are to be attached to the holders below the connection terminals. The wire sizes that are specified in the
wiring guidelines should be used. The conductor ends should be finished with metal sleeves. The structure of the
wiring must enable the disconnection of the point where the UPS is connected to the power supply network e.g. by
switching the overcurrent switches.
with clips that are to be attached to the holders below the connection terminals. The wire sizes that are specified in the
wiring guidelines should be used. The conductor ends should be finished with metal sleeves. The structure of the
wiring must enable the disconnection of the point where the UPS is connected to the power supply network e.g. by
switching the overcurrent switches.
It is recommended that the protection systems in the building's electric system are used as one of the protection levels.
The parameters of the building's electric wiring system protection should be selected in accordance with the type and
magnitude of the load that is connected to the system. In extreme cases, the different characteristics of the building
and UPS’ protection systems may cause the former to be activated more quickly.
The parameters of the building's electric wiring system protection should be selected in accordance with the type and
magnitude of the load that is connected to the system. In extreme cases, the different characteristics of the building
and UPS’ protection systems may cause the former to be activated more quickly.
The UPS should be connected by qualified and authorised personnel only. The UPS is completely
disconnected from the power network only when the power supply cord is disconnected.
disconnected from the power network only when the power supply cord is disconnected.
.
!
6-11, 8-11, 10-11, 12-11
Input line protection
BYPASS line protection
Primary line protection
input terminals
BYPASS phase line
primary phase line
primary neutral line
output terminals
output phase line
output neutral line
BYPASS line protection
Primary line protection
input terminals
BYPASS phase line
primary phase line
primary neutral line
output terminals
output phase line
output neutral line
three grounding line terminals
input terminal for the external battery pack
red pole
blue pole
red pole
blue pole
protection for the external batterypack terminal (fuse- link)
www.ever.eu