RF Engineering & Energy Resource LLC KI-GSM904 Manual Do Utilizador
13
Press “3” to close siren
Press “4” to away arming
Press “5” to disarming
Press “6” to play records
Press “7” to start12V voltage output
Press “8” to stop 12V voltage output
Press “#” to confirm and hang up automatically
Note: If the user phone is busy or not able to connect, the system will dial next call alarm
number until it is answered.
Press “4” to away arming
Press “5” to disarming
Press “6” to play records
Press “7” to start12V voltage output
Press “8” to stop 12V voltage output
Press “#” to confirm and hang up automatically
Note: If the user phone is busy or not able to connect, the system will dial next call alarm
number until it is answered.
33.Remotely control by call
You can call the numbers of system from any phone remotely, and the
system will answer It automatically after system detects the call in ring
times you set before. When you hear the beep, please input passwords
and the system will allow you to program as per the following command
system will answer It automatically after system detects the call in ring
times you set before. When you hear the beep, please input passwords
and the system will allow you to program as per the following command
Press “1” to listen in for 20 seconds
Press “2” to start siren
Press “3” to close siren
Press “4” to away arm
Press “5” to disarm
Press “6” to play records
Press “7” to output 12V electric power
Press “8” to close 12V output
Press “#” to confirm and hang up automatically
Press “2” to start siren
Press “3” to close siren
Press “4” to away arm
Press “5” to disarm
Press “6” to play records
Press “7” to output 12V electric power
Press “8” to close 12V output
Press “#” to confirm and hang up automatically
Note: when you hear ‘DI DI’ sounds when you input the password, it means the
password is wrong. You can try to input another new password. If the wrong times
is more than 3, or no any operation within 20 seconds, the system will hang up
automatically
password is wrong. You can try to input another new password. If the wrong times
is more than 3, or no any operation within 20 seconds, the system will hang up
automatically
Understanding for CID protocol network
This system is compatible with CID protocol. This function is convenient
to work with central monitor station (CMS)for community, building,
factory or bank etc
to work with central monitor station (CMS)for community, building,
factory or bank etc
1.Enable/disable CID protocol network
Once enable the CID network function, the system can work with CID
international protocol center monitor station (CMS)
Command: [*]→[0]→[9→[A]→[*] *09 2/1/0 *
A=2/1/0
2:Enable, upload all alarm information, including arm/disarm
information