GSI ELECTRONICS INC. EDGERFID Manual Do Utilizador
KP-8IN-1REL menus and navigation
For complete navigation instructions, see
Operating environment
Inside use
To avoid exposing the system to harmful gases or excessive humidity, install the KP-8IN-1REL, TP-8IN-
1REL, TR-2IN-1REL in a corridor or a room dedicated to electronic controllers. The ideal ambient temper-
ature is between 20 °C and 25 °C (68 °F - 77 °F). The temperature should not be below 0 °C (32 °F) and
should not exceed 40 °C (104 °F).
1REL, TR-2IN-1REL in a corridor or a room dedicated to electronic controllers. The ideal ambient temper-
ature is between 20 °C and 25 °C (68 °F - 77 °F). The temperature should not be below 0 °C (32 °F) and
should not exceed 40 °C (104 °F).
Ensure there is sufficient ventilation around the unit.
Install the KP-8IN-1REL, TP-8IN-1REL, TR-2IN-1REL far from sources of vibrations and where they are
not likely to get bumped.
not likely to get bumped.
Outside use
Install the KP-8IN-1REL, TP-8IN-1REL, TR-2IN-1REL far from sources of vibrations and where they are
not likely to get bumped.
not likely to get bumped.
Install the KP-8IN-1REL, TP-8IN-1REL, TR-2IN-1REL in an easily accessible area.
IMPORTANT: If you are not planning on installing the system immediately, store it in a cool dry place.
Requirements for the mounting structure
Fix the enclosure into the supporting structure behind the drywall. If this is not possible, consider the addi-
tion of a wood frame on which the enclosure could be screwed.
tion of a wood frame on which the enclosure could be screwed.
12
895-00695