Protection 1 ProtectionOne Security System 250P1 Manual Do Utilizador
- 30 -
Using Device Commands
General Information
Your system may be set up so that certain lights or other devices can
be turned on or off by using the device command from the keypad.
Ask your installer if this has been done in your system. If
programmed for your system, some devices may activate
automatically upon certain system conditions. In this case, the
following commands can be used to override the device activation.
Ask your installer for a full explanation of this feature.
be turned on or off by using the device command from the keypad.
Ask your installer if this has been done in your system. If
programmed for your system, some devices may activate
automatically upon certain system conditions. In this case, the
following commands can be used to override the device activation.
Ask your installer for a full explanation of this feature.
To Activate Devices
Enter security code, then press # + 7 + device number.
+ # + 7 +
(Security Code)
(Device Number)
Example: Press 7 2 9 6 then press #, then press 7, then enter
the number representing the device you wish to activate. Ask your
installer for the device numbers assigned for your system.
installer for the device numbers assigned for your system.
To Deactivate Devices
Enter security code, then press # + 8 + device number.
+ # + 8 +
(Security Code)
(Device Number)
Example: Press 7 2 9 6 then press #, then press 8, then enter
the number representing the device you wish to deactivate. Ask your
installer for the device numbers assigned for your system.
installer for the device numbers assigned for your system.
Device
Device #/Description
1
2
3
4
2
3
4