VIZIO TL-WR641G Manual Do Utilizador

 

 

- 16 - 

Dynamic IP. If you aren’t given any login parameters (fixed IP Address, logging ID, etc), 

please select Dynamic IP. If you are given a fixed IP (static IP), please select Static IP. If you 

are given a user name and a password, please select the type of your ISP provided 

(PPPoE/BigPond/L2TP/PPTP). If you are not sure which connection type you use currently, 

please contact your ISP to obtain the correct information. 

1.  If you choose Dynamic IP, the router will automatically get IP parameters from your ISP. 

You can see the page as follows (Figure 4-4): 

 

Figure 4-4 

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP 

address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP 

parameters from your ISP. Click the Release button to release the IP parameters. 

¾

  MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet 

networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely 
required, and should not be done unless you are sure it is necessary for your ISP 
connection. 

¾

  Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use 

These DNS Servers and enter the primary and secondary addresses into the correct fields. 
Otherwise, the DNS servers will be assigned dynamically from your ISP.   

)

If you get address and find error when you go to a Web site, it is likely that your DNS servers are 

set up improperly. You should contact your ISP to get DNS server addresses.