VIZIO TL-WR641G Manual Do Utilizador

 

 

- 17 - 

¾

  Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast 

applications. If you cannot get the IP Address normally, you can choose this option. (This is 
rarely required.) 

2.  If you choose Static IP, you should have fixed IP Parameters specified by your ISP. The 

Static IP settings page will appear, shown in Figure 4-5: 

 

Figure 4-5 

You should type the following parameters into the spaces provided: 

¾

  IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. 

¾

  Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, 

usually is 255.255.255.0. 

¾

  Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation 

provided by your ISP. 

¾

  MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet 

networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is 

rarely required, and should not be done unless you are sure it is necessary for your ISP 

connection. 

¾

  Primary DNS - (Optional) Enter the DNS address in dotted-decimal notation provided by 

your ISP. 

¾

  Secondary DNS - (Optional) Type another DNS address in dotted-decimal notation 

provided by your ISP if provided. 

3.  If you choose PPPoE, you should enter the following parameters (Figure 4-6):