PowerDsine PD-6006 Manual Do Utilizador

 

 

You must read the following safety information before carrying out any 
installation, removal or any maintenance procedure on the Power over LAN 
Midspan. Warnings contain directions that must be followed for personal and 
product safety. Follow all directions carefully. 

 

WARNINGS   
 

• 

Read the Installation Instructions in Section 3 before connecting the 
Power over LAN Midspan to its power source. 

 

• 

The Midspan must use a grounded power cord, as defined in 
paragraph 1.2. 

 

• 

This product relies on the building installation for short-circuit 
(overcurrent) protection. Ensure that a fuse or circuit breaker no larger 
than 15 A for 120 VAC, (U.S.) 10 A for 230 VAC (international) is 
used. 

 

• 

Do not work on the system, connect or disconnect cables during 
periods of lightning activity. 

 

• 

A voltage mismatch can cause equipment damage and may pose a 
fire hazard. If the voltage indicated on the label is different from the 
power outlet voltage, do not connect the Power over LAN Midspan to 
this outlet. 

 

• 

For shelf-mounted equipment, be certain that the surface is stable and 
strong enough to support the equipment. Do not stack more than four 
the Power over LAN Midspans. 

• 

Ultimate disposal of this product should be handled according to all 
local laws and regulations.  

• 

The Power over LAN Midspan "Data" and "Data + Power" ports are 
shielded RJ-45 data sockets. They cannot be used as Plain Old 
Telephone Service (POTS) telephone sockets. Only RJ-45 data 
connectors may be connected to these sockets. 

a

a

a

a