PowerDsine PD-6006 Manual Do Utilizador

 

 

In the event that the power cord is replaced, the replacement must meet local 
requirements. 

U.S.A. and 
Canada 

 

The cord must be UL-approved or CSA certified. 

 

The minimum specification for the flexible cord is: 

• 

No. 18 AWG 

• 

Type SV or SJ 

• 

Three-conductor. 

 

The cord set must have a rated current capacity of at least 

10 A. 

 

The attachment plug must be an earth-grounding type with a 

NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) 
configuration.

 

 

Denmark 

 

The supply plug must comply with section 107-2-D1, 

standard DK2-1a or DK2-5a. 

 

Switzerland 

 

The supply plug must comply with SEV/ASE 1011. 

 

 

 

 

 

The appliance coupler (connecting to the Midspan and not to 
the wall plug) must have a configuration for mating with an 
EN60320/IEC320 appliance inlet. 

 

 

 

 

The power socket outlet must be near the Midspan and be 
easily accessible. You can only remove power from the unit by 
disconnecting the power cord from the outlet. 

 

 

 

 

This unit operates under SELV (Safety Extra Low Voltage) 
conditions according to EN60950/IEC 950. The conditions are 
only maintained if the equipment to which it is connected also 
operates under SELV conditions. 

 

 

 

 

France and Peru only: This unit cannot be powered from IT 
supplies. If your supplies are of IT type, this unit must be 
powered by 230 V (2P+T), via an isolation transformer with a 
ratio of 1:1 and with the secondary connection point labeled 
Neutral, connected directly to ground. 

 

 

 

 

U.K. only: The Power over LAN Midspan is covered by 
General Approval, NS/G/12345/J/100003, for indirect 
connection to a public telecommunications system.