Kwik Tek 800-553-5953 Manual Do Utilizador

 

1.  Read, understand and follow the safety and operating instructions found in this manual.  Know 

the limitations and hazards associated with operating the machine. 

 
2.  Eye Safety:  Wear an approved safety face shield, goggles or safety glasses to protect eyes 

when operating the machine. 

 
3.  Grounding the Machine:  Machines equipped with three prong grounding plugs are so equipped 

for your protection against shock hazards and should be plugged directly into a properly 
grounded three-prong receptacle in accordance with national electrical codes and local codes 
and ordinances.  A grounding adapter may be used.  If one is used, the green lead should be 
securely connected to a suitable electrical ground such as a ground wire system.  Do not cut off 
the grounding prong or use an adapter with the grounding prong removed. 

 
4.  Work Area:  Keep the floor around the machine clean and free of tools, tooling, stock scrap and 

other foreign material and oil, grease or coolant to minimize the danger of tripping or slipping.  
Kwik-Way recommends the use of anti-skid floor strips on the floor area where the operator 
normally stands and that each machine's work area be marked off.  Make certain the work area 
is well lighted and ventilated.  Provide for adequate workspace around the machine. 

 
5.  Guards:  Keep all machine guards in place at all times when machine is in use. 
 
6.  Do Not Overreach:  Maintain a balanced stance and keep your body under control at all times. 
 
7.  Hand Safety:  NEVER wear gloves while operating this machine. 
 
8.  Machine Capacity:  Do not attempt to use the machine beyond its stated capacity or operations.  

This type of use will reduce the productive life of the machine and could cause the breakage of 
parts, which could result in personal injury. 

 
9.  Avoid Accidental Starting:  Make certain the main switch is in the OFF position before connecting 

power to the machine. 

 
10. Careless Acts:  Give the work you are doing your undivided attention.  Looking around, carrying 

on a conversation and horseplay are careless acts that can result in serious injury. 

 
11. Job Completion:  If the operation is complete, the machine should be emptied and the work area 

cleaned. 

 
12. Disconnect All Power and Air to Machine before performing any service or maintenance. 
 
13. Replacement Parts:  Use only Kwik-Way replacement parts and accessories; otherwise, 

warranty will be null and void. 

 
14. Misuse:  Do not use the machine for other than its intended use.  If used for other purposes, KW 

Products Inc. disclaims any real or implied warranty and holds itself harmless for any injury or 
loss that may result from such use.   

KW 

Products 

Inc. 

 

 

 

    800-553-5953 

   

4.

 

500 57

th

 Street, Marion, IA  52302  USA 

Copyright 2004   All Rights Reserved