Kwik Tek 800-553-5953 Manual Do Utilizador

 

 

The most common cause of wheel breakage is due to improper mounting and abusive and/or 
careless operation. Only through proper use, regular machine maintenance, service and 
inspection procedures can wheel breakage be prevented. 
 
It is the responsibility of the user to inspect, at regular intervals, to be certain that mounting 
flanges are in usable condition, are of proper size and shape and that no damage has occurred 
to the wheel or the machine. 
 
The following DO'S and DONT'S should be used as a guide to safer grinding 
 
 

1)  CHECK all wheels for CRACKS or other 

DAMAGE before mounting. 

1) DON'T USE wheels WHICH HAVE BEEN 

DROPPED or otherwise damaged. 

2)  USE MOUNTING BLOTTERS when 

supplied with wheels 

2) DON'T USE EXCESSIVE PRESSURE 

WHEN MOUNTING wheel.  Tighten nut only 
enough to hold wheel firmly. 

3)   Be sure WHEEL HOLE, threaded or 

unthreaded, FITS machine arbor 
PROPERLY and that flanges are clean, flat 
and of the proper type for the wheel you 
are mounting. 

3) DON'T USE HEAVY GRINDING 

PRESSURE 

4)   Always RUN WHEEL WITH GUARD IN 

PLACE at least one minute before grinding 
(wheel dresser). 

4) DON'T USE MACHINE FOR ANY 

PURPOSE OTHER THAN GRINDING 
VALVE SEATS. 

 

5)   Always WEAR PROTECTIVE SAFETY 

GLASSES or proper face shield. 

 

6)  Wear a DUST RESPIRATOR, as dust 

conditions are present in most grinding 
operations 

 

 
 

KW 

Products 

Inc. 

 

 

 

    800-553-5953 

   

5.

 

500 57

th

 Street, Marion, IA  52302  USA 

Copyright 2004   All Rights Reserved