Kwik Tek 800-553-5953 Manual Do Utilizador

 
1.  Loosen handle #3 and rotate the pointer line until it aligns to the index angle desired and 

retighten. 

2.  After attaching the correct grinding wheel to the grinder unit, carefully lower the grinder unit 

onto the dresser arbor item #1 

3.  Loosen item #5 and raise or lower the arbor until the face of the wheel is in relative position 

to the diamond (#6). Retighten # 5 

4.  Adjust the diamond #6 by turning the knurled knob #2 until the diamond is nearly in contact 

to the face of the grinding wheel. 

5.  Start the motor and begin dressing the wheel using handle #4 and slowly sweeping the face. 

(Follow the directions below) 

 

 

 
 
 
6.  Slowly feed the diamond in while moving it across the face of the grinding wheel while 

moving it with handle #4. 

 
WARNING:  Take the lightest cut possible – never jam the diamond into the grinding wheel.   

 
 
 
 
 

KW 

Products 

Inc. 

 

 

 

    800-553-5953 

   

6.

 

500 57

th

 Street, Marion, IA  52302  USA 

Copyright 2004   All Rights Reserved