BMW 2008 X6 xDrive35i Manual Do Proprietário

Página de 288
 47
Adjusting side extensions
You can fold the side extensions on the head 
restraint forward for increased lateral support in 
the resting position.
Safety belts
To ensure that the safety systems con-
tinue to provide optimized protection, 
please observe the adjustment instructions on 
page
<
Before every drive, make sure that safety belts 
are being worn at all of the occupied seats. Air-
bags complement the safety belt as an addi-
tional safety device, but they do not represent a 
substitute.
Fastening
Make sure you hear the latch plate engage in 
the belt buckle.
Safety belt reminder for driver's seat 
and passenger seat
The indicator lamp lights up and a 
signal sounds. A message also 
appears on the Control Display. 
Please check whether the safety belt is cor-
rectly fastened.
The safety belt reminder is operative at speeds 
above approx. 5 mph/8 km/h. It can also be acti-
vated if objects are placed on the passenger 
seat.
Releasing
1.
Grasp the belt firmly.
2.
Press the red button in the buckle.
3.
Guide the belt into its reel.
The shoulder strap's anchorage point will be 
correct for adult seat occupants of every build if 
the seat is correctly adjusted, refer to page
Damage to safety belts
In the event of loads caused by accidents 
or other damage: replace the belt system 
including the safety belt tensioners and any 
child restraint systems, and have the belt 
anchor points checked. Only have this work 
carried out at a BMW Sports Activity Vehicle 
Center or at a workshop that works according to 
BMW repair procedures with correspondingly 
trained personnel. Otherwise correct operation 
of this safety equipment is not guaranteed.
<
Belt-force limiter
The effect of the belt-force limiter on the 
driver's seat is dependent on the position of the 
driver's seat.
To maintain the long-term accuracy of this 
function, the driver's seat must be calibrated if a 
corresponding message is displayed on the 
Control Display.
Calibrating driver's seat
The warning lamp lights up. A mes-
sage also appears on the Control Dis-
play. Please calibrate the driver's 
seat.
1.
Move the driver's seat forward until it stops.
2.
Move the driver's seat forward again. It 
briefly moves toward the front in the pro-
cess.
3.
Set the desired seating position again.
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG