BMW 2008 X6 xDrive35i Manual Do Proprietário

Adju

sting

The calibration is completed when the message
on the Control Display disappears. Should this
message continue to be displayed, repeat the
calibration. If the message does not disappear
even after repeated calibration, have the sys-
tem checked as soon as possible.

Never carry out calibration while the vehi-
cle is moving, as this can cause accidents.

Make sure that no persons or objects become
wedged during the calibration process, as this
can cause injuries or damage.

Seat heating*

Front

The temperature setting progresses one step
through its control sequence each time you
press the button. The maximum temperature is
supplied when three LEDs are lit.
To switch off: press the button longer.
The temperature is reduced, if need be, down to
no heat in order to reduce the load on the bat-
tery. The LEDs remain lit.

Temperature distribution*

The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page

Open the start menu.

Move the controller to the left to open "Cli-
mate".

Select "Seat heater distribution" and press
the controller.

Move the controller to the left or right to
select "Driver" or "Passenger".

Turn the controller. The adjustment is
applied; the field can be changed.

Rear

Operation similar to front seat heating; without
temperature distribution.

Active seat ventilation* and

seat heating*

Front

1 Seat heating
2 Active seat ventilation