BMW 2008 X6 xDrive35i Manual Do Proprietário

Press button

1 or 2 once depending on the

temperature or ventilation position. The LED in
the respective button lights up.
The temperature or ventilation levels are shown
on the Control Display.
The air quantity is reduced and if need be, the
ventilation is switched off in order to reduce the
load on the battery. The LEDs remain lit.
To switch off: press button

1 or 2 longer.

Temperature distribution

The heat output can be distributed variously in
the seat cushion and the backrest.
iDrive, for operating principle refer to page

Open the start menu.

Move the controller to the left to open "Cli-
mate".

Select "Driver's seat climate" or "Passen-
ger's seat climate" and press the controller.

Turn the controller to adjust the distribu-
tion.
The setting is applied.

Heated rear seats

Operation similar to front seat heating; without
temperature distribution, refer to page

Active seat*

The seat cushion is actively varied by alter-
nately raising and lowering the right and left half
of the seat cushion. This reduces muscular ten-
sion and fatigue to help prevent lower back
pain.
Press the button to switch on; the LED lights
up.
The action of the system is reduced and if need
be, switched off in order to reduce the load on
the battery. The LED remains lit.
If you switch off the active seat, it can take up
to 1 minute before the two halves of the seat
cushion have returned to their initial position.

Mirrors

Exterior mirrors

The mirror on the passenger's side is
more curved than the driver's mirror.

Objects reflected in the mirror are closer than
they appear. Do not estimate the distance of
following traffic based on what you see in the
mirrors; otherwise, there is an increased risk of
accident.