HP Cell Phone Accessories E6380-90019 Manual Do Utilizador
Chapter 4
109
CDMA Measurements - Screens and Control Fields
RF Channel
RF Gen Freq
RF Channel
The
RF Channe
l field is displayed when the
RF Display
field on the
INSTRUMENT CONFIGURE screen is set to
Chan
.
This field displays the current channel number. Channel tuning
eliminates the need to enter transmit and receive frequencies directly
into the Test Set. Once the radio’s RF channel standard is selected, you
only have to enter the channel number to automatically set the
eliminates the need to enter transmit and receive frequencies directly
into the Test Set. Once the radio’s RF channel standard is selected, you
only have to enter the channel number to automatically set the
RF
Generator
and
RF Analyzer
to the correct frequency.
Operating Considerations
To utilize the correct transmit and receive frequencies select the
appropriate channel standard from the
appropriate channel standard from the
RF Chan Std
field on the
INSTRUMENT CONFIGURE screen.
Screens on which this field is displayed
CDMA ANALYZER
CDMA GENERATOR
CODE DOM (Code Domain Analyzer): main controls menu
CDMA GENERATOR
CODE DOM (Code Domain Analyzer): main controls menu
RF Gen Freq
This field specifies the center frequency of the generated CDMA signal.
This field is displayed only when the
This field is displayed only when the
RF Display
field on the
INSTRUMENT CONFIGURE screen is set to
Freq
.
NOTE
Channel Tuning
You can configure the Test Set to allow direct entry of
channel numbers (instead of entering the frequency) by
using the
channel numbers (instead of entering the frequency) by
using the
RF Display
field on the INSTRUMENT
CONFIGURE screen. See the
Screens on which this field is present
CDMA GENERATOR
Main Menu