Thermador SGS305FS Guia Do Utilizador

Página de 68
English 13
Proper Cookware
Cookware Characteristics
Aluminum or copper bottomed pans conduct heat 
evenly.
Steel pans, if not combined with other metals, may 
cook unevenly.
Cast-iron cookware absorbs heat slowly and cooks 
more evenly at low-to-medium settings.
Flat, heavy bottom pans provide even heat and 
stability.
DO NOT USE pans that are thin, warped, dented or 
ridged as they heat unevenly.
Choosing Cookware
Cookware Recommendations
Specialty Cookware
Pans that span two burners, i.e. griddles, roasters and fish 
poachers, may be used when placed front to back. Adjust 
flame equally to cook evenly. For five-burner models, use 
the Thermador® accessory griddle Model SGRIDDLEF on 
the center burner only. 
Use a Wok with a flat bottom. If using a round-bottom wok 
with a maximum 16-inch diameter, use the Thermador® 
accessory support wok ring, Model SWOKRINGF. 
Canners and pressure cookers must meet the same 
requirements as described above. After bringing contents 
to a boil, use lowest heat setting possible to maintain a boil 
or pressure (for pressure canners/cookers).
Practice
Pan Bottom Diameter 
The flame should be the same size as the 
bottom of the pan or smaller. Do not use small 
pans with high flame settings as the flames 
can lick up the sides of the pan.
Oversize pans that span two burners are 
placed front to back, not side to side.
For best cooking results, large pans should 
not extend over the sides of the grates.
Use Balanced Pans
Balance is important for stability and even 
cooking.
Pans must sit level on the cooktop grate 
without rocking or wobbling.
Center pan over burner.
Use a Lid That Fits Properly
A well-fitting lid helps shorten the cooking 
time.