Thermador SGS305FS Guia Do Utilizador

Página de 68
English 14
Cleaning and Maintenance
Daily Cleaning
The entire Cooktop can be safely cleaned by wiping with a 
soapy sponge, then rinsing and drying. If stubborn soil 
remains, follow the recommended cleaning methods 
below.
Always use the mildest cleaner that will do the job. Use 
clean, soft cloths, sponges or paper towels.
Rub stainless steel finishes in the direction of the grain. 
Wipe area dry to avoid water marks.
Before cleaning, be certain the burners are turned off 
and the grates and burners are cool.
Do not clean removable cooktop parts in any self-
cleaning oven.
After cleaning, place all parts in their proper positions 
before using cooktop.
For proper burner performance, keep igniters clean 
and dry.
Keep the ignitor ports clean for proper lighting 
performance of the burners. It is necessary to clean 
these when there is a boil over or when the burner 
does not light even though the electronic ignitors click.
Do not use flammable cleansers such as lighter fluid or 
WD-40.
CAUTION: 
Do not touch any of the burners when the 
cooktop is in use. 
SGS models only: All ignitors spark when any 
single burner is turned on.
Cleaning Guidelines
The cleaners recommended below and on the following 
page indicate a type and do not constitute an endorsement 
of a particular brand. Use all products according to 
package directions.
Cooktop Cleaning Chart
 Figure 12: Cleaning the Cooktop
36” Model
(91cm)
Cooktop Part / Material
Suggested Cleaners
Important Reminders
Burner Base 
Aluminum Alloy
Detergent and hot water; rinse 
and dry.
Stiff nylon bristle tooth brush to 
clean port openings.
Abrasive Cleansers: Brillo® or 
S.O.S.® pads. Rinse and dry.
Do not scratch or gouge the port 
openings.
Clean ports with a wire or 
straightened paper clip.
Do not use a toothpick that may 
break off.