EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge Manual Do Utilizador

 

Step 1  Set the COU to perform a Wireless Router (Wireless Interface IP: 

192.168.1.1, Ethernet Interface IP: 192.168.2.1, default route: 
192.168.2.254). 

 

Step 2  Set Wireless parameters on COU: Channel (1) and SSID 

(wireless). 

 

Step 3  Set the ROU to perform a Wireless Router (Wireless Interface IP: 

192.168.1.2, Ethernet Interface IP: 192.168.10.1, default route: 
192.168.1.1).  

 

Step 4  Set Wireless parameters on ROU: Channel (1) and SSID 

(wireless), and these parameters must be the same with COU. 

 

Step 5  Set the DHCP server service on the ROU and apply it on Ethernet 

Interface. 

 

Step 6  The ROU assigns IP addresses to PC1 and PC2. 

 

The operator can also disable NAT behavior on COU and enable NAT 
behavior on ROU (enable NAT on Wireless Interface). In this case, any 
outgoing packets will transfer to 192.168.1.2. 

 

The operator can also enable NAT behavior on COU (enable NAT on 
Ethernet interface) and enable NAT behavior on ROU (enable NAT on 
Wireless Interface).